Phase 2 Geoenvironmental Investigation – New Industrial Facility

We have just completed a Phase 2 Geoenvironmental Ground Investigation under planning controls for a new industrial development on Tyne Tunnel Trading Estate for a developer client.

The investigation comprised a series of cable percussion boreholes sunk to 10m bgl to provide information on ground conditions and to allow in situ testing to be undertaken (SPTs), and to enable samples to be collected for laboratory analysis (geotechnical and chemical). The drilling work was undertaken by our approved specialist ground investigation subcontractor Geocore of Cleveland who always provides us with excellent services.  In addition, a series of trial pits were excavated across the site using a JCB 3CX Sitemaster, the trial pits were sunk to the maximum reach of the machine (4.5m bgl). The JCB was hired in and supervised on site by a DBS engineer.

The investigation was designed using a 35m grid non judgmental sampling strategy, a cost effective approach for an initial geoenvironmental ground investigation.

The final data once received back from the testing laboratories will allow foundations for the new units going on the site to be designed, and it will also allow a Phase 2 Geoenvironmental report to be prepared for the site, inclusive of human health and controlled waters risk assessments (Generic Quantitative Risk Assessment) to support final planning condition discharge for contaminated land.

We are also preparing a similar investigation for a new industrial facility in Darlington, it is good to see confidence returning to the marketplace and seeing clients taking sites forward again to create employment in the region.

If you would like to read more about our Phase 2 Ground Investigation services, please have a look at our services page here.

Some photos of the investigation are provided below.

Borehole, Geoenvironmental, Phase 2 Ground Investigation, Trial Pit
Previous Post
FAQ Conceptual Site Models
Next Post
New CIRIA Guidance Published C735 & C748 – Ground Gas Protection Measures for New Buildings

Related Posts